Microcomputer-controlled torsion testing machine for metal materials

　　The microcomputer-controlled torsion testing machine for metal materials is suitable for the torsion test of metal materials, displaying the torque, torsion angle and test speed of the samples in real time. The torsion angle of the samples can be set to detect the torque of the samples and their corresponding angles at multiple points, usually until they are twisted to fracture, so as to determine one or more torsional mechanical properties of the materials and print detailed test data reports.

　　Function introduction:

　　1. Torsion angle test of metal samples

　　2. Torsional torque test of metal samples

　　3. Curve analysis test of metal samples

　　4. Torsion time and speed of metal samples

　　5. Maximum torque and peak value of metal samples

　　6. Constant torque test of metal samples

　　7. Destructive test of metal samples

　　8. Qualification test of metal samples

No.	Parameter	Details
1	Torque	100Nm, 200Nm, 300Nm, 500Nm, 1000Nm, 2000Nm, 5000Nm (Standard models as above, customizable)
2	Testing Machine Class	Class 0.5 / Class 1
3	Angle Resolution	0.01°
4	Torsion Speed Control Range	0.1 - 720°/min (Customizable)
5	Rotation Angle Measurement Range	0 - 99999°
6	Repeatability Relative Error of Torque Indication	< 0.5%
7	Loading Mode	Fully automatic
8	Torque Measurement Range	1% - 100% FS (Full Scale)
9	Test Torque Direction	Bidirectional loading
10	Torque Resolution	1/300,000
11	Test Travel	300 - 1000mm (Customizable)
12	Relative Error of Torque Indication	< 0.5% / < 1%
13	Relative Error of Torsion Angle Indication	< 0.5%
14	Torsion Fixtures	To be discussed by both parties