The microcomputer-controlled drill pipe torsion tester is mainly used for testing the torsional moment, torsional angle, torsional strength and other torsional mechanical properties of petroleum drill pipes, mine drill pipes, rock drill pipes, anchor drill pipes and geological drill pipes. The loading is controlled by computer, the torque is detected by high-precision torque sensor, the rotation angle is detected by photoelectric encoder, and the detection results are displayed digitally. Widely used in coal mining industry, oil field industry, ocean engineering industry and drill pipe manufacturing enterprises. After the test conditions are set, a batch of samples can be tested in turn, and the test conditions, sample parameters, test data and results can be stored and called at any time. Print the test report.
Microcomputer-controlled drill pipe torsion tester
...
1. test torque: 200N.m, 500N.m, 1000N.m, 5000Nm, 10000Nm, 20000Nm (customizable);
2. Structural form: horizontal structure, motor loading;
3. Torque measuring range: 2%-100% of full scale;
4. Torque accuracy: better than 1% of the indicated value;
5. Minimum reading value of twist angle: 0.1;
6. Torsion angle accuracy: better than 1% of the indicated value;
7. Test speed: adjustable from 0.1 to 720/min;
8. Test speed accuracy: better than 1% of the indicated value;
9. spacing between chucks: 500mm (customizable);
10. Test rotation direction: bidirectional loading;
11. Test machine level: level 1/level 0.5;
12. Power supply: 220V, 50Hz；
