The wire winding testing machine is employed to assess the surface integrity and coating adhesion of metallic wires—including steel, copper, and aluminum—under winding conditions. In the test procedure, the wire is wound around a mandrel of predetermined diameter for a specified number of turns, after which the surface is examined for the presence of cracks, peeling, or coating detachment.
Wire Wrapping Testing Machine
The wire winding testing machine is employed to assess the surface integrity and coating adhesion of metallic wires—including steel, copper, and aluminum—under winding conditions. In the test procedure, the wire is wound around a mandrel of predetermined diameter for a specified number of turns, after which the surface is examined for the presence of cracks, peeling, or coating detachment....
| No. | Parameter | Specification |
|---|---|---|
| 1 | Wire Diameter Range | 0.1 mm – 6 mm |
| 2 | Gauge Length Between Grips | ≤ 300 mm |
| 3 | Outer Diameter of Jaw Fixture | 74 mm |
| 4 | Jaw Clamping Range | 0 – 6.0 mm |
| 5 | Torsion Speed | 30, 60, 90, 120, 180, 300 r/min |
| 6 | Speed Error | < ±10% |
| 7 | Minimum Resolution of Turns | 0.1 turn |
| 8 | Coaxiality of Two Grips (mm) | < φ0.4 mm |
| 9 | Guide Rail Parallelism (mm) | < 0.2 mm |
| 10 | Jaw Hardness (HRC) | > 55 HRC |
| 11 | Machine Dimensions (L×W×H) | Approx. 980 × 400 × 600 mm |
| 12 | Machine Weight | Approx. 120 kg |
| 13 | Power Supply | AC 220 V, 50 Hz |
